Register | Login

Switch ‘ON’ the Laminar Airflow and UV light before 30 minutes of the analysis.

4.2.2 Switch off the UV light after 30 minutes and record the UV light Cumulative hours

4.2.3 Monitor and record the DP as per specified limit (10-15 mm of water coloumn).

4.2.4 Perform the microbiological analysis under the Laminar airflow.

4.2.5 After completions of analysis clean the platform of laminar airflow with 70% IPA

and switch on the UV light for minimum 30 minutes. After completion of 30min.switch off the UV light.

4.2.6 Record the details of Usage and Cleaning for Laminar Air Flow.

Who Voted for this Story

TechyTape is a Google PageRank 4 DoFollow Social Bookmarking Site

High PR Social Bookmarking Sites List 2015